
Add to Cart
Span 7.5~31.5 Meters Single Beam Overhead Traveling Cranes LDC Model
Single Beam Overhead Traveling Cranes LDC Model Introduction
LDC type single girder bridge crane is a light crane with a lifting capacity of 1 to 20 tons. The span is 7.5 to 31.5 meters. The job level is A3. Operating temperature is -25°C to 40°C. It is used together with CD type or MD type electric hoist. Do not use this device in flammable, explosive or corrosive atmospheres.
Single Beam Overhead Traveling Cranes LDC Model Technical Parameter
Lifting Capacity | T | 1t | 2t | 3t | 5t | 10t | 16t | 20t | ||
Span | m | 7.5~22.5m | 7.5~31.5 | |||||||
Speed | Lifting | MD1 hoist | m/min | 8/0.8 (7/0.7) | 3.5/0.35 | |||||
CD1 hoist | 8 (7) | 3.5 | ||||||||
Traveling of electric hoist | 20 | 20 | ||||||||
Traveling of crane | 20/30 | 20/30 | ||||||||
Wheel diameter | Φ270 | Φ370 | ||||||||
Width of trail | 37~70mm | 37~70mm | ||||||||
Operational Model | remote control; ground handle | remote control; ground handle | ||||||||
Working Duty | A3 | |||||||||
Power Supply | According to your demands | According to your demands |
Single Beam Overhead Traveling Cranes LDC Model Advantage
1) Light structure,easy installation and maintenance
2) Reasonable structure,strong bearing capacity
3) Low noise, soft starting and stopping
4) Safe and reliable operation
5) Low cost maintenance, long working life
6) Motor soft start,High protection level IP44,IP54,IP55
Single Beam Overhead Traveling Cranes LDC Model Details