
Add to Cart
LX Type Single Girder Light Duty Overhead Crane 3 Ton 5 Ton For Warehouse
LX Type Single Girder Light Duty Overhead Crane Description
LX Electric Single Girder Suspension Crane is a light duty crane. LX electric single-girder suspension crane is mainly used in places where it is impossible to install a column to support the bridge crane. The end car of the underslung overhead traveling crane rides on the bottom flange of the runway beam. Typically, underslung runways are suspended from the roof of a building and are only suitable for light lifting capacities, not exceeding 10 tons. The LX Electric Single Girder Suspension Crane is suitable for working environments where the operating temperature is between -25C and +40C. It is forbidden to use in places where there are flammable, explosive, and corrosive substances in stock.
LX Type Single Girder Light Duty Overhead Crane Technical Parameter:
Lifting Capacity | T | 1t | 2t | 3t | 5t | 10t | 16t | 20t | ||
Span | m | 7.5~22.5m | 7.5~31.5 | |||||||
Speed | Lifting | MD1 hoist | m/min | 8/0.8 (7/0.7) | 3.5/0.35 | |||||
CD1 hoist | 8 (7) | 3.5 | ||||||||
Traveling of electric hoist | 20 | 20 | ||||||||
Traveling of crane | 20/30 | 20/30 | ||||||||
Wheel diameter | Φ270 | Φ370 | ||||||||
Width of trail | 37~70mm | 37~70mm | ||||||||
Operational Model | remote control; ground handle | remote control; ground handle | ||||||||
Working Duty | A3 | |||||||||
Power Supply | According to your demands | According to your demands |
LX Type Single Girder Light Duty Overhead Crane Advantage:
1) Light structure,easy installation and maintenance
2) Reasonable structure,strong bearing capacity
3) Low noise, soft starting and stopping
4) Safe and reliable operation
5) Low cost maintenance, long working life
6) Motor soft start,High protection level IP44,IP54,IP55
LX Type Single Girder Light Duty Overhead Crane Details: