Henan Yuntian Crane Co., Ltd.
YUNTIAN CRANE-China's leading brand of industrial cranes
Add to Cart
5 Ton Single Girder Eot Crane With Hoist Low Noise For Warehouse
Single Girder Eot Crane Introduction:
The beam frame of the crane is a square box frame, which is made of Q235B steel plate. The smaller body has a larger lifting space. Condition is very good.
The hoisting device is a wire rope electric hoist, which is a low clearance frame electric hoist, which takes up less space in the vertical direction; the lifting motion is driven by a double-speed motor, and the lifting speed is 5/0.8m/min (4/0.66m/min), The walking motion is driven by a single-speed motor and matched with a frequency converter. The traveling speed is 2~20m/min or 3~30m/min.
Single Girder Eot Crane Technical Parameter:
| Lifting Capacity | T | 1t | 2t | 3t | 5t | 10t | 16t | 20t | ||
| Span | m | 7.5~22.5m | 7.5~31.5 | |||||||
| Speed | Lifting | MD1 hoist | m/min | 8/0.8 (7/0.7) | 3.5/0.35 | |||||
| CD1 hoist | 8 (7) | 3.5 | ||||||||
| Traveling of electric hoist | 20 | 20 | ||||||||
| Traveling of crane | 20/30 | 20/30 | ||||||||
| Wheel diameter | Φ270 | Φ370 | ||||||||
| Width of trail | 37~70mm | 37~70mm | ||||||||
| Operational Model | remote control; ground handle | remote control; ground handle | ||||||||
| Working Duty | A3 | |||||||||
| Power Supply | According to your demands | According to your demands | ||||||||
Features of Single Girder Eot Crane:
1, Overhead traveling on the steel structure, normally in workshop
2, Light self weight, could save steel structure cost.
3, Lifting and traveling is very accurate.
4, VVF/ frequency inverter control, continuous speeds to operate, very stable to lift and traveling.
5, Six direction action, to make sure the enough wide working area.
6, Full safety system as follows: * Weight overload protection
* Emergency stop system
* Over current protection,Short-circuit protection
* Phase sequence protection
* Zero position protection
* Voltage loss protection
* Limit switch and stopper for crane long traveling and cross traveling
* Lifting overhigh and overlow limit switch
Single Girder Eot Crane Application:
Widely used to handle materials in many industries' workshop and warehouse. such as machinery manufacture. warehouse. logistic. food. paper making, electronics industries workshop and other material handling situations.
Single Girder Eot Crane Detailed Images:
